CMCI Board of Governors


2017 - 2018 CMCI Board of Governors

Raymond J. Brady, CCM, FCMAA
Las Vegas, NV

Ray Brady is a retiree who most recently worked as a Program Construction Manager and Vice President for MWH Global. Brady worked in the construction industry for 45 years before retiring. Throughout his career, Brady worked on projects dealing with water, wastewater, hotels, hospitals, pulp and paper, oil & gas, nuclear, roads and bridges, mines and tunnels. Prior to joining the Board of Governors,Brady spent six years on CMAA's Board of Directors. Four of those years were spent serving as Vice Chairman. Brady is a CCM and a member of CMAA's prestigious College of Fellows.
Vice Chair
Katie Choe, CCM, LEED GA
City of Boston - Boston, MA

Katie Choe is the Chief Engineer and Director of Construction Management for the City of Boston’s Public Works Department. She is responsible for 800 miles of roadway and 1,600 miles of sidewalk within the City, including an annual $40 million construction program, utility and private construction coordination, ADA compliance, and infrastructure asset management. Katie previously served as a construction project manager, Sustainability Program Manager, and Assistant Director of Capital Programs for Massport. In 2013, Katie was invited to be a delegate at the EPA’s first national Green Infrastructure Summit. While at Massport Katie was a member of the British-American Business Council of New England’s 40 Under 40 Roundtable. She was awarded the 2015 Rita Barron Public Official Award from the Charles River Watershed Association.
Robert Gries, PE, CCM, PMP
General Services Administration
- Seattle, WA

Robert Gries has over 27 years of experience planning and executing projects. During those years, Robert has managed a variety of projects; from small, short-term projects to large, multi-year, politically-visible projects. Robert served as the NOAA liaison to EPA/DOE's Laboratories for the 21st Century (Labs21) Partnership Program. In this role, he identified strategies for reducing the high energy consumption of labs. His portfolio of projects includes the NMFS Santa Cruz Laboratory (Santa Cruz, CA), NOAA Marine Operations Center - Pacific (Newport, OR), and the NMFS La Jolla Laboratory (La Jolla, CA).  Robert has a BS in Architectural Engineering from the Milwaukee School of Engineering and an MS in Civil Engineering from the University of Maryland. He is a licensed engineer in Wisconsin and Washington as well as a Project Management Professional and CCM. In 2003, Robert was recognized as NOAA's Engineer of the Year. In 2011 he received NOAA's Administrator Award as well as the Department of Commerce's Bronze Medal for project excellence.
Christine Acampora, CCM,
C.B. Richard Ellis - Herndon, VA

Christine Acampora is a Director of Project Management at CBRE, the world’s largest Commercial Real Estate Services firm serving owners, investors and occupiers. Bank of America, Thales Communications, Microsoft, PepsiCo, and E*TRADE ares just a few of the high profile clients that Christine has served during her 8 year tenure with CBRE. Christine currently leads a team of 15 project management professionals who are dedicated to the Booz Allen Hamilton account. Christine began her career as an architect, where she focused on civic infrastructure projects, such as libraries, fire stations and recreation centers. In her 13 years managing design and construction at Dulles International Airport, Christine contributed to over $400 million worth of work. In 2006, Christine was selected as PB’s PM of the year; an honor she shared with Jim Ruddell.  She also became a LEED Accredited Professional in 2009. She currently mentors three young women in the design/construction industry.
Michael Houston, CCM, LEED AP, BD+C
Ardmore Associates - Chicago, IL

Mr. Houston joined Ardmore Associates, LLC in 2010 as an executive manager. He has more than 20 years of experience providing Construction Management services to various building types all manner of project delivery methods. He provides operational leadership and develops productive relationships among industry peers and clients. His expertise is in managing multiple projects while ensuring contract compliance and effective reporting to key stakeholders. His project experience is consists of new construction and renovation work in both the private and public sectors, including; K-12, Higher Education, Telecommunications, Research and Development and Healthcare facilities, and in the public sector, where he is managing the redevelopment of subsidized housing for the City of Chicago and the renovation and new construction of multiple facilities for City Colleges of Chicago.
Raoul D. Ilaw, PE, CCM
STV Construction Management
- New York, NY

Raoul D. Ilaw is a Vice President with STV Construction, Inc. and brings more than 25 years of experience in the construction industry. He has provided executive and on-site supervision of major transportation, health care, educational, and government facility projects, bringing a thorough knowledge of leading-edge industry practices and regulations. Raoul is both a professional civil engineer and a certified construction manager, and has used his varied training and skills to manage multi-year capital programs for the USPS, the DOD, the FAA, and other public clients. He joined STV in 2014 after a long career at Parsons. Mr. Ilaw is the former President of Metro NY/NJ Chapter and   previously served as a member of CMAA’s Board of Directors for six years, serving five years as Vice Chairman. He was awarded the CMAA Special Service Award in 2009 at the conclusion of his term .He is Licensed Civil Engineer and holds a MS in Management from NYU and a BE in Civil Engineering from CCNY. Mr. Ilaw was also appointed to the City of Stamford, CT Zoning Board of Appeals in 1997 and served seven years.

Keville Enterprises, Inc. - Boston, MA

As Chief Operations Officer for Keville Enterprises, Mr. Mason is responsible for corporate operations and nation-wide business development and marketing.  He also serves as the leader of Keville’s Boston office and Principal in Charge of Keville’s Construction Management, Program Management, Project Controls, Cost Estimating, Federal Programs, and Value Engineering practices.  Mr. Mason has over 31 years of experience in the industry, with specific experience in the areas of Construction Management, Planning, and concentrated experience in Claims Analysis and Claims Avoidance.  Mr. Mason began his career by serving for 9 years as an officer in the United States Navy Civil Engineer Corps, and subsequently spent 5 years on the Central Artery/Tunnel Project as a Claims Analyst.  He joined Keville Enterprises in 1998.  Mr. Mason is a former Director on the CMAA National Board of Directors, and is a former President of the New England Chapter.  He is a Licensed Civil Engineer, and holds the following degrees: ME, Penn State University, Civil/Construction Engineering and Management; BS, Syracuse University, Civil Engineering; BS, SUNY College of Environmental Science and Forestry, Building Construction/Wood Products Engineering.  Mr. Mason was elected to become a member of CMAA's prestigious College of Fellows in 2017.
Jim Morris, CCM
Carson City Water Reclamation Facility
- Carson City, NV

Jim Morris is a project manager for the City of Carson, Nevada. He is in charge of Capital Projects for Wastewater Improvements. Jim has been in the construction management industry since 1976. He has managed all types of vertical and horizontal projects throughout the continental southwest. Jim has been involved in Program Management assignments, including the complete management of Capital Improvement Programs for several public agencies.Jim started the CMAA's Southern Nevada Chapter in 2001. He has also and served on CMAA's Board of Directors.

Anthony Sanger, CCM, CSI, CDT
Turner & Townsend - Acworth, GA


Anthony Sanger, CCM is a Senior Vice President and Director of Program Management and Project Controls in North America for Turner & Townsend.  Trained as an aerospace and mechanical engineer, Anthony began his career of more than 30 years working for a large general civil / industrial contractor.  Throughout his career, he has filled most roles on a program, serving as contractor, sub-contractor, designer, construction manager, program manager, claims consultant and owner.  His career has included the direct management of mega programs throughout the world, where he has served in senior program leadership positions including: Program Director; Design and Construction Director; Operations Director; and Program Controls Manager on large programs with a total CapEx value of more than $30 billion. Additionally, he has served in a claims advisory and management role on many programs.  Active in CMAA at both the Chapter and National levels, Anthony has served as Treasurer of the South Atlantic Chapter and has served on the national Professional Development and Standards of Practice Committees.

Charles Wm. Collins Sr., CCM
VDOT - Shacklesford, VA

Bill has 38 years’ experience in the Construction field. He has managed and enhanced VDOT’s Construction Quality Assurance & Training Programs. Bill has overseen all aspects of Roadway and Bridge construction in Virginia. He’s worked with The US Department of Labor & Industry and has  Developed the Nationwide Highway Construction Inspector Apprenticeship Program. He currently mentors and works with all levels of Construction Management throughout Virginia.
Chad White, CCM, DBIA
Vanir - Los Angeles, CA

Chad White has nearly 20 years of construction experience. He is currently a Project Director with Vanir Construction Management, Inc.  He is a Terminal Development Manager at Los Angeles International Airport (LAX) where he and his staff are directly involved with nearly $7B in airport modernization and expansion work. He serves on the Board of Directors for CMAA's Southern California chapter, as Chair of the CCM Committee. Chad received the prestigious Mehdi Heydari Culture of Certification Award from CMAA in 2014. Chad also volunteers with the Vanir Foundation as an Ambassador to Vanir sponsored schools in Southern California, where he helps bring curriculum, uniforms, and food to children in need.
Kara Lentz, PE, CCM, LEED AP
HNTB corporation - Dallas TX
Kara Lentz is a Vice President and Senior Program Manager for the Aviation at HNTB. She has over 18 years of experience in Program, Project and Construction Management, primarily in the Aviation Sector. Kara has managed major airport expansions and redevelopment Programs at the Dulles International Airport, Denver International Airport, Louis Armstrong New Orleans International Airport, and Dallas Fort Worth Airports.  She received her undergraduate degree in Civil Engineering from The Cooper Union for the Advancement of Science and Art and her Masters degree in Civil Engineering with focuses in Transportation Engineering and Construction Engineering and Management from Virginia Tech.  In 2015, she was honored as an ENR Mountain States 20 under 40 recipient, an Aviation Business Magazine’s 40 under 40 recipient, and the Denver Business Journal’s 40 under 40 recipient. In addition to her career in aviation, Kara has served as a professional mentor for the University of Southern California’s and University of Colorado, Boulder’s Engineers without Borders chapters.  She has held her Professional Engineer’s License since 2006, CCM since 2008, and has been a LEED Accredited Professional since 2009.
Don Young, PE, CCM, F.SAME
MBP - Williamsburg, VA

Don Young is a Sr. VP at McDonough Bolyard Peck, Inc. (MBP). He serves as a regional manager in Virginia and promotes the MBP values on a daily basis. Don mentors CCM applicants, serves as board chairman for Certifications for CMAA's Central Virginia chapter, and is a certified 'CCM Standards of Practice' course instructor. Don also served on the two-year national level SAME Warrior Transition Task Force, where he promoted the CCM and CMIT certifications. Don has over 30 years of experience in the construction industry. His notable works include supporting the USACE in the United States, Europe, and the Middle East,  managing large federal construction projects. 
CMIT Representative
Michael Riverso, CMIT
Gilbane - New York, NY

Michael Riverso is currently a Project Manager for Gilbane Residential Construction, LLC .  Michael graduated from Roger Williams University in 2013 with a BS in Construction Management and is currently attending Stevens Institute of Technology at night to earn a MS in Construction Management.  He started working for Gilbane in 2013 in healthcare renovating a Psychiatric Treatment Area and later renovating an active Emergency Department and Waiting Room.  As part of these projects Michael helped with the writing of scopes and buyout of trade contractors, setting up and maintaining the submittal and rfi process, reviewing and processing change orders, managing several trade contractors, and maintaining accurate construction documents.  Michael also was tasked developing logistics plans for work that would impact patient areas and critical hospital operations areas.  He also managed several small phasing projects and planned and managed an electrical shutdown and relocation of the power for an active patient area, X-Ray Suite, and CT Scan.



CM CareerHQ

Industry Partnerships